Welcome to NWS
Please Select an Option Home Services Services Services Services Services Services Services

E Q U I P M E N T

For equipment orders and further information please contact
Tara Busslinger (office and equipment manager).


Our inspectors carry the following types of equipment:

Abrasive Blasting

    SSPC-VIS 1-89 Visual Blast Standards [photo]
    Hypodermic needle pressure gauge [photo]
    Testex Press-O-Film replica tape [photo]
    KTA Surface Profile Comaprator tape [photo]
    Elcometer 123 Profile Gauge [photo]
    Spring Micrometer
    30,000 candle power Maglite flashlight
    Sling Psychrometer and Cole Parmer Hygrometers [photo]
    Digital Electronic Psychrometers [photo]
    PTC Surface Thermometers [photo]
    Raytek non-contact surface thermometers [photo]
    30X Microscope and 25X Macroscopes [photo]
    Mirrors
    Pitt Gauges [photo]
    Kitagawa Tubes....Scat Test [photo]

Coating

    NIST (NBS) Calibration Standards
    Nordson Wet Film Thickness Gauge [photo]
    Positector 6000 electronic gauge (Ferrous & Non-Ferrous) for metals,
      including graphite [photo]
    Elcometer 345 Dry Film Thickness Gauge [photo]
    Mikrotest III Dry Film Thickness Gauge [photo]
    Low Voltage Tinker Rasor Holiday Detector [photo]
    Chalk
    NWS Inspection Inc ISO 9003 Operations Manual


Each area office has the following additional equipment for testing purposes:

    Elcometer 256 Dry Film Thickness Instrument (Ferrous & Non-Ferrous),   with extension probes, right angle probes, and data output printer [photo]
    Hi Voltage Spy Holiday Detectors (6,000V-20,000V) [photo]
    Mid Range Tinker Rasor Holiday Detectors (900V-3400V) [photo]
    High Range 0-200 mil Film Thickness Gauges [photo]
    Barcol Hardness Testers [photo]
    Shore Hardness Testers (A & D) [photo]
    Cross-Cut Guide Adhesion Test Kits [photo]
    Lances for Holiday Testing pipe
    Springs for Holiday Testing Pipe External Surfaces [photo]
    Set of current SSPC Specifications [photo]
    SCAT Kit - Soluble Chloride & Ferrous Ion Contamination Kits [photo]
    Elcometer Adhesion Testers (0-1000 lbs) [photo]
    Tooke Gauge Mark IV
    Medium Intensity Ultra Violet Lamps [photo]
    Delmhorst Moisture Indicator [photo]
    Zahn Viscosity Cups [photo]
    Quanix 1500 (Ferrous/Non-Ferrous) Dry Film Thickness Instrument [photo]
    Clemtex Pressure Blast Analyzer Gauges [photo]
    Bechtel Inspector's Manual
    Positector 100 ultrasonic gauge to measure single or mulitple layers on   concrete, wood, plastic, glass, ceramic, metal, etc. [photo]
    Positector 200 ultrasonic gauge to measure coatings on concrete, wood,   ceramic, metal, etc. [photo]
    Positector Dew Point Meter [photo]


[HOME] [SERVICES] [IMAGES] [EQUIPMENT] [REFERENCES] [CONTACTS] [RATES] [ENQUIRY]

Copyright © 2004 NWS Inspection Inc., all rights reserved.